
Simon XT
User Manual
20
Status beeps
The panel sounds status beeps to alert you to various system events and conditions.
Note: You may receive a different number of status beeps if you press the buttons quickly.
Alarm sirens and lamp modules
Exterior and interior sirens make three different alarm sounds on the premises, each indicating a different type
of alarm. Sirens are programmed by the installer to time out and stop sounding after a specified time.
Use Table 9 to understand the siren sounds used by the security system.
Table 8. Status beeps
Activity Beep Response
Doors + Windows Exit delay and Entry delay beeps sound two times every five seconds and two times per
second during the last ten seconds. If silent exit is used, the exit delay beeps will only sound
twice when you arm and twice when the exit delay expires.
Motions Exit delay and Entry delay beeps sound three times every five seconds and three times
per second during the last ten seconds. If silent exit is used, the exit delay beeps will only
sound three times when you arm and three times when the exit delay expires.
Doors + Windows and Motions Exit delay and Entry delay beeps sound four times every five seconds and four times per
second during the last ten seconds. If silent exit is used, the exit delay beeps will only sound
four times when you arm and four times when the exit delay expires.
Disarm One beep.
Chime Two beeps.
Special chime Three beeps.
Trouble beeps Six beeps every minute. Press STATUS to stop beeps for four hours.
No activity beeps Twenty beeps every minute for five minutes. Feature must be programmed by the installer.
Table 9. Alarm Siren and X10 Light Information
Function Fire Intrusion Emergency
X10 Lights Steady Flashing Steady
X10 Siren Steady Steady Alarm beeps
Interior and panel siren Temporal 3
a
a. Temporal 3 refers to a continuous pattern of three siren pulses, then off for 1.5 seconds, three siren pulses, then off for 1.5 seconds.
Steady Fast on/off
Exterior siren Temporal 3
a
Steady
Komentáře k této Příručce